Operation Manual

GB
crankcase leaking Worn
cylinders, pistons , piston rings
6. Poor fuel mix (too much oil
7. Poor ignition
5. Replace the cylinder, piston or piston
rings, grind cylinder and piston, install
6. fill up according to instructions
7. Set a gap in the ignition module (0.3-0.4
mm)
The engine will not
stop
1. The plug is pale grey with marks of
white-hot (melting drops))
2. Carbon residue in the ignition area.
1. Fit in the plug of higher thermal value .
2. Clean the cylinder head, piston bottom
and cylinder the engine block
8 Inspections and Maintenance
CAUTION! The instructions below shall apply to regular conditions of use. In severe conditions and
longer periods of workdays it is necessary to shorten the intervals as appropriate.
After having accomplished the job, always check
The entire machine and carry out the cleaning
Regular check and treatment:
• Check the air filter (clean it up if necessary)
• Check the ignition plug (replace if necessary)
• The function and quantity of the plastic cord.
→ Always swith the driving unit off when doing maintenance or a repair
8.1 Inspections and Maintenance Safety Instructions
Only a unit maintained and cared for on a regular basis may be a serviceable aid. Insufficient maintenance
and care may result in emergencies and unforeseen accidents.
Only authorised servicing centres may do repairs requiring special orifessional knowledge . Unprofessional
action may cause damage of the machine or put your safety at risk.
8.2 Inspections and Maintenance Schedule
Time Interval Description Othe Details
if necessary
Before every start of
work
• Check the gas lever
Before every start of
work
• Check on the entire machine visually j
Before every start of
work
• Zkontrolujte usazení daného vestavného přístroje
After every use
• Zkontrolujte celý stroj a proveďte nezbytné čištění.
9 Spare Parts
Claims and orders of spare parts will be attended to fast and smoothly. Use the form at
http://www.guede.com/support
The form may be requested at
T: +49 (0) 79 04 / 700-0
F: +49 (0) 79 04 / 700-250
E-Mail: [e-mail]
40