Operation Manual
6
To measure elapsed or split time:
1. PRESS pusher A to start timing.
2. PRESS pusher B to stop timing. The stopwatch continues to count seconds elapsed but the
hands do not move.
3. PRESS pusher B again to resume timing.
The hands move quickly to indicate elapsed time and continue counring.
NOTE: The hour, minute and second hands on the watch will continue to indicate the correct time
while using the stopwatch.
If stopwatch hands do not return to “60” when the stopwatch is reset:
1. PULL out the crown.
2. PRESS pushers A or B repeatedly to move hands to “60” position.
3. PUSH in the crown.
6,9,12 THREE-EYE
CHRONOGRAPH WITH & WITHOUT DATE
Crown position “A”, “B” & “C”.
Pushers “A” (top) & “B” (bottom)
12 o’clock eye “1/10 seconds elapsed”
9 o’clock eye “minutes elapsed”
6 o’clock eye “seconds elapsed”
This chronograph watch has 3 functions:
TIME, CALENDAR, STOPWATCH
Crown position A , B & C.
Pushers A (top) and B (bottom).
12 o’clock eye 1/10 seconds elapsed.
9 o’clock eye minutes elapsed.
6 o’clock eye seconds elapsed.
TIME, CALENDAR, STOPWATCH.
To set the time:
1. PULL crown to C position.
2. TURN crown either way to correct time.
3. PUSH crown into A position.
1. PULL out crown to B position.
2. TURN crown clockwise to correct date.
3. PUSH in crown to A position.
NOTE: The date changes automatically every
24 hours.
1/10 seconds elapsed up to one second (top eye).
Minutes elapsed up to one hour (middle eye).
Seconds elapsed up to one minute (bottom eye)
* BEFORE USING THE STOP WATCH, reset the
stopwatch hands to the 60 and 0 positions.