Operation Manual
9
Timing 2 competitors:
1. PRESS Pusher “A” to start timing of first event.
2. PRESS Pusher “B” to stop timing of first event. Stopwatch continues to run internally.
3. PRESS Pusher “A” to stop timing of second event.
4. PRESS Pusher “B” to view time of second event.
5. PRESS Pusher “B” to reset.
6,12 TWO-EYE CHRONOGRAPH WITH DATE
Crown position “A” , “B” & “C”.
Pushers “A” (top) & “B” (bottom).
6 o’clock eye “1 minute up to maxinum 60 minute”.
12 o’clock eye “second”.
This chronograph watch has 3 functions:
TIME, CALENDAR, STOPWATCH.
TIME
To set the time:
1. PULL Crown to “C” position.
2. TURN Crown either way to correct time.
3. PUSH Crown in to “A” position, small second hand begins to run.
CALENDAR
To set the calendar:
1. PULL out Crown to “B” position.
2. TURN Crown clockwise to correct date.
3. PUSH in Crown to “A” position.
NOTE: The date changes automatically every 24 hours.
STOPWATCH
The stopwatch is capable of measuring:
1/1 second elapsed up to 12 hours.
BEFORE USING THE STOP WATCH, reset the stopwatch hands to the “0” positions.
To reset stopwatch hands:
1. PULL Crown to position “C”.
2. PRESS Pusher “A” intermittently until the chronograph second hand is reset to “0”.
STOPWATCH MINUTE
SECOND HAND
STOPWATCH SECOND
1. PULL Crown to C position.
2. TURN Crown either way to correct time.
3. PUSH Crown in to A position, small second
hand begins to run.
1. PULL out Crown to B position.
2. TURN Crown clockwise to correct date.
3. PUSH in Crown to A position.
NOTE: The date changes automatically
every 24 hours.
1/1 second elapsed up to 12 hours.
BEFORE USING THE STOP WATCH, reset
the stopwatch hands to the 0 positions.
1. PULL Crown to position C.
2. PRESS Pusher A intermittently until the
chronograph second hand is reset to 0.
Crown position A, B and C.
Pushers A (top) and B (bottom).
6 o’clock eye 1 minute up to maxinum 60 minute.
12 o’clock eye second.
TIME, CALENDAR, STOPWATCH.
1. PRESS Pusher A to start timing.
2. PRESS Pusher A to stop timing.
3. PRESS Pusher B to reset.
1. PRESS Pusher A to start timing.
2. PRESS Pusher A to stop timing.
3. PRESS Pusher A to restart timing.
4. PRESS Pusher A to stop 2nd timing.
5. PRESS Pusher B to reset.