Operation Manual
10
Standard stopwatch measurement:
1. PRESS Pusher “A” to start timing.
2. PRESS Pusher “A” to stop timing.
3. PRESS Pusher “B” to reset.
Accumulated elapsed time measurement:
1. PRESS Pusher “A” to start timing.
2. PRESS Pusher “A” to stop timing.
3. PRESS Pusher “A” to restart timing.
4. PRESS Pusher “A” to stop 2nd timing.
5. PRESS Pusher “B” to reset.
3,6,9,12 FOUR-EYE CHRONOGRAPH
NOTE: Crown position “A” & “B”
NOTE: Pushers “A” (top) & “B” (bottom)
NOTE: 12 o’clock eye “1/10” or seconds elapsed”
NOTE: 9 o’clock eye “minutes elapsed”
NOTE: 6 o’clock eye “seconds elapsed”
NOTE: 3 o’clock eye “24-hour”
This chronograph watch has 2 functions:
TIME, STOPWATCH.
TIME
To set the time:
1. PULL Crown to “B” position.
2. TURN Crown either way to correct time.
3. PUSH Crown in to “A” position.
STOPWATCH
The stopwatch is capable of measuring:
1/10 seconds elapsed up to 60 minutes (top eye).
Minutes elapsed up to one hour (middle eye).
Seconds elapsed up to one minute (bottom eye)
BEFORE USING THE STOPWATCH, reset the stopwatch hands to the “60” and “0” positions.
STOPWATCH MINUTE
24-HOUR
STOPWATCH SECOND
1. PRESS Pusher A to start timing.
2. PRESS Pusher A to stop timing.
3. PRESS Pusher B to reset.
1. PRESS Pusher A to start timing.
2. PRESS Pusher A to stop timing.
3. PRESS Pusher A to restart timing.
4. PRESS Pusher A to stop 2nd timing.
5. PRESS Pusher B to reset.
1. PRESS Pusher A to start timing.
2. PRESS Pusher B to stop split.
3. PRESS Pusher B to begin again.
4. PRESS Pusher A to stop.
5. PRESS Pusher B to reset.