Operation Manual
14
6, 9, 12 THREE EYE
1/20 SECOND CHRONOGRAPH WITH DATE
Crown position “A”, “B” & “C”.
Pushers “A” (top) & “B” (bottom).
6 o’clock eye “hour & minutes elapsed”.
9 o’clock eye “second”.
12 o’clock eye “1/20 seconds elapsed”.
This chronograph watch has 3 functions:
TIME, STOPWATCH, CALENDA.
TIME
To set the time:
1. PULL Crown to “C” position.
2. TURN Crown either way to correct time.
3. PUSH Crown in to “A” position.
CALENDAR
To set the calendar:
1. PULL out Crown to “B” position.
2. TURN Crown clockwise to correct date.
3. PUSH in Crown to “A” position.
NOTE: The date changes automatically every 24 hours.
Do not set the date between 9:00 PM and 1:00 AM.
STOPWATCH
The stopwatch is capable of measuring:
Hour & Minutes elapsed up to 12 hours (bottom eye).
1/20 Seconds elapsed up to 12 hours (top eye).
Seconds elapsed up to 12 hours.
BEFORE USING THE STOP WATCH, reset the stopwatch hands to the “60” and “12 o’clock”
positions.
To reset stopwatch hands:
1. PULL Crown to position “C”.
2. PRESS Pusher “A” for 2 seconds until the stopwatch hour, minute and second hand is reset to
“0”.
1/20 SECONDS
crown
position
A B C
PUSHER B
SECOND
STOPWATCH SECOND
PUSHER A
STOPWATCH
MINUTE
STOPWATCH
HOUR
1. PULL Crown to position C.
2. PRESS Pusher A for 2 seconds until the stopwatch
hour, minute and second hand is reset to 0.
1. PRESS Pusher A to start timing.
2. PRESS Pusher A to stop timing.
3. PRESS Pusher B to reset.
1. PRESS Pusher A to start timing.
2. PRESS Pusher B to stop split.
3. PRESS Pusher B to begin again.
4. PRESS Pusher A to stop.
5. PRESS Pusher B to reset.
1. PRESS Pusher A to start timing.
2. PRESS Pusher A to stop timing.
3. PRESS Pusher A to restart timing.
4. PRESS Pusher A to stop 2nd timing.
5. PRESS Pusher B to reset.
1. PRESS pusher A to start timing.
2. PRESS pusher B to stop timing of rst event. Stopwatch continues to run internally.
3. PRESS pusher A to stop timing of second event.
4. PRESS pusher B to view time of second event.
5. PRESS pusher B to reset.