Operation Manual
5
To set the day:
1. PULL out Crown to C position.
2. Advance time 24 hours to change the day.
3. PUSH in Crown to A position.
Note: 24 Hour indicator changes automatically when time is adjusted.
THE THREE EYE CHRONOGRAPH
This chronograph watch has 2 functions:
TIME, STOPWATCH.
The left eye (stopwatch hand) measures minutes
elapsed on stopwatch, up to a maximum of 60 minutes.
The centre eye (stopwatch hand) measures seconds
elapsed on stopwatch, up to a maximum of 60 seconds.
It also shows measurement of elapsed time.
The right eye (24 hour hand) indicates time on a 24 hour
basis.
TIME
To set time:
1. PULL out crown to B position
2. TURN crown either way to correct time
3. PUSH crown to A position
NOTE: If eye indicating 24 hours needs adjustment, advance watch hands by 12 hours.
STOPWATCH:
The stopwatch can measure up to 1 hour in minutes and seconds. Before using the stopwatch
ensure that stopwatch hands are at the ‘60’ or ‘12 o’clock’ position.
To adjust hands:
1. PULL out Crown to B positions.
2. PRESS pusher A or B to adjust hands.
3. PUSH Crown to A position.
To set stopwatch:
1. PRESS pusher A to start timing.
2. PRESS pusher A to stop timing.
3. PRESS pusher B to reset stopwatch to ‘60’.
1. PULL out Crown to B positions.
2. PRESS pusher A or B to adjust hands.
3. PUSH Crown to A position.
1. PRESS pusher A to start timing.
2. PRESS pusher A to stop timing.
3. PRESS pusher B to reset stopwatch to 60.
1. PRESS pusher A to start timing.
2. PRESS pusher B to stop timing. The stopwatch continues to count seconds elapsed
but the hands do not move.
3. PRESS pusher B again to resume timing.
The hands move quickly to indicate elapsed time and continue counring.
NOTE: The hour, minute and second hands on the watch will continue to indicate
the correct time while using the stopwatch.
1. PULL out the crown.
2. PRESS pushers A or B repeatedly to move hands to 60 position.
3. PUSH in the crown.