Operation Manual

7
TIME
To set the time:
1. PULL Crown to “C” position.
2. TURN Crown either way to correct time.
3. PUSH Crown into “A” position.
CALENDAR
To set the calendar:
1. PULL out Crown to “B” position.
2. TURN Crown clockwise to correct date.
3. PUSH in Crown to “A” position.
NOTE: The date changes automatically every 24 hours.
STOPWATCH
The stopwatch is capable of measuring:
1/10 seconds elapsed up to one second (top eye).
Minutes elapsed up to one hour (middle eye).
Seconds elapsed up to one minute (bottom eye)
BEFORE USING THE STOP WATCH, reset the stopwatch hands to the “60” and “0” positions.
2,6,10 THREE-EYE CHRONOGRAPH
NOTE: Crown position “1”, “2” & “3”
NOTE: Pushers “A” (top) & “B” (bottom)
NOTE: Left eye “minute totalizer”
NOTE: Right eye “small second”
NOTE: Centre eye “date indicator”
This chronograph watch has 3 functions:
TIME, CALENDAR, STOPWATCH
TIME
To set the time:
1. PULL Crown to position “3” .
2. TURN Crown either way to correct time.
3. PUSH Crown to position “1” .

NOTE: Crown position 1, 2 and 3
NOTE: Pushers A (top) and B (bottom)
NOTE: Left eye minute totalizer
NOTE: Right eye small second
NOTE: Centre eye date indicator

TIME, CALENDAR, STOPWATCH


1. PULL Crown to position 3.
2. TURN Crown either way to correct time.
3. PUSH Crown to position 1.


1. PULL Crown to position 2.
2. TURN Crown clockwise to correct the date.
3. PUSH in Crown to position 1.


1. Minutes elapsed up to 30 minutes (left eye).
2. Chronograph hand 1/5 second
BEFORE USING THE STOPWATCH, reset the stopwatch hands to the 60 position by
means of pusher B. If stopwatch Hands move improperly, reset the hands as follows:







 