Operation Manual

17
E) TIMER
PRESS S3 three times to Time Mode
1. HOLD S2 2 seconds to set "Hour"; Press S1 to advance
2. PRESS S3 once to set "Minute"; Press S1 to advance
3. PRESS S2 once when setting is complete.
4. RESS S1 to "Start" / "Stop"
5. PRESS S2 to "Reset"
When counting complete, alarm will sound.
ANA-DIGIT
FEATURES
Hour, Minute, Second
Month, Date
Back Light (EL)
NORMAL TIME MODE
1. PRESS S1 once to view Month & Date
2. PRESS S1 twice to view Second
3. PRESS S2 once, ""Time"" & ""Date"" mode will be displayed alternatively
PRESS S1 twice, back to Time mode"
4. PRESS EL to light-up display
SETTING SEQUENCE
1. PRESS S2 twice to set "Month"; Press S1 to advance
2. PRESS S2 once to set "Date"; Press S1 to advance
3. PRESS S2 once to set "Hour"; Press S1 to advance
4. PRESS S2 once to set "Minute"; Press S1 to advance
5. PRESS S2 once when setting is complete. Normal time will be displayed (Press S1 if time mode
does not flash).
EL
S1S2


Hour, Minute, Second
Month, Date
Back Light (EL)

1. PRESS S1 once to view Month and Date
2. PRESS S1 twice to view Second
3. PRESS S2 once, Time and Date mode will be displayed alternatively
PRESS S1 twice, back to Time mode
4. PRESS EL to light-up display

1. PRESS S2 twice to set Month; Press S1 to advance
2. PRESS S2 once to set Date; Press S1 to advance
3. PRESS S2 once to set Hour; Press S1 to advance
4. PRESS S2 once to set Minute; Press S1 to advance
5. PRESS S2 once when setting is complete. Normal time will be displayed
(Press S1 if time mode does not ash).



 