Installation Manual

RadaScan Installation Instructions
RadaScan Sensor, PN 20-0067-0 Rev A
Before starting an installation, please note the following important points:
• All servicing / installation to be undertaken ONLY by qualified service
personnel. There are no user serviceable parts inside the unit.
• Do NOT plug in, turn on or attempt to operate an obviously damaged unit.
• Replace fuses ONLY with the same type and rating as marked on the
label adjacent to the fuse holder.
• The equipment accepts the input 100-240Vac / 50-60Hz / 2.8 – 1.2A, as
marked on the equipment. Ensure that the supply voltage available at the
installation site meets the voltage range marking, as provided on the
equipment.