User's Manual

Connect the encoder wheel to the antenna.

Always remember to attach the sprint as well for a firm connection of the wheel.

Note: The precision of the encoder wheel depends on several factors, such as; the condition of

measurement surface, the pressure applied on the wheel and possible wear.

Warning: When using MALÅ GX HDR with a cart or measuring wheel, the wheel calibration must

be changed to the appropriate wheel; enter the Settings Menu on the GX Controller and change

the Acquisition Parameters to the correct wheel.

Power up

Start the MALÅ GX HDR by pressing the power button on both the HDR antenna and the HDR

Controller.

Power down

To turn the antenna and monitor off, first select Shut down from the Start Menu, confirm the

action by selecting YES. When the Controller screen is black, push the power button on the

monitor and release quickly.

Note: The antenna will automatically turn off when the monitor is powered down.

Note: If a power cable is accidentally pulled out, the MALÅ GX HDR components will start

automatically when reconnected.