User's Manual

Note: Changing the three different trigger options will change the

options listed below the Acquisition Mode icon.

Note: When measuring by time, make sure that the time interval is

appropriate.

Selecting the Wheel type icon can choose a selection of predefined

wheels from the drop-down list.

Tip: Additional wheels and individual calibration can be added to

the list by accessing the Acquisition Parameters menu.

Note: The accuracy of the encoder wheel is not infinite and depends

on several factors, such as the measurement surface, the pressure

applied on the wheel and possible wear. If you are unsure of the

encoder wheel accuracy, a re-calibration should be made.

Point interval sets the distance between the measured

points/traces in the radargram.