User's Manual

Select the X-Section button to view the X-axis data in the side view.

When activated, use the Navigator to scroll across the data set.

Select the Y-Section button to view the Y axis data in the side view

Select the Depth button and use the Navigator to scroll through the

time slices in the top view window

Select the Full Screen option. This enables access to the screen

capture options

Select the JPEG button to access the screen capture options

In the Settings menu the following options are available as well:

Change the color scheme for the GPR profiles. Three options are

available, a grey scale and two different color schemes.

Set the velocity based on field tests or soil type. Setting the velocity

allows adjustment of the depth scale for differing soil conditions.

Warning: This is a critical setting if accurate depth information is

required. Soil conditions can vary rapidly with location and all

depth information must be used with caution.

Set to Manual or Automatic gain control

Note: Manual gain activates the Time Gain button on the main

screen and allows the user to manually adjust the gain. Selecting

Auto deactivates the Time Gain button on the main screen and the

GX Controller will apply the highest gain level for the conditions.

Select Migration to On, this applies migration to the 3D Project.