User's Manual

48
MALÅ GeoDrone 80 Project
If the GX Controller is connected to a MALÅ
GeoDrone 80, the GX controller will
automatically show the GeoDrone Start Menu
options at start.
Press to start a GeoDrone
Project.
The GeoDrone antenna is connected to the GX
Controller by WiFi. If this is active the WiFi
symbol is seen in the upper right corner.
The default settings are suitable for most
applications but if necessary, adjust settings
in the settings menu
Start New Profile press
Note: The antenna has an in-built data storage module, which enables data to be stored
whilst taking measurements. This enables a more secure way of data collection as data
transmission can be interrupted when utilising Wi-Fi. Data are restored to the Controller
when Wi-Fi connection is established again or by data cable. Read more in Wifi Option and
Settings section
Note: More information on MALÅ GeoDrone measurements can also be found in the MALÅ
GeoDrone User Guide.