Instruction Manual

15
After Sales Helpline 03303 800 661
13 14
BLOWER OPERATION
This wet and dry vacuum cleaner has blow capabilities.
To use the blower feature follow the instructions listed.
WARNING: KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS.
WARNING: WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT BE
INHALED.
1. Verify that the power cord is disconnected from the power socket.
2. Make sure the container and any collected waste is emptied before using as a blower.
This also includes removal of the dust bag.
3. Remove hose from the vacuum port.
4. Insert the locking end of the hose into the blowing port on the rear side of the power
head and lock into position (Fig. 13).
5. Fit the desired extension wand or nozzle to the vacuum cleaner hose (Fig. 14).
6. Ensure the power switch is turned off and plug into the power supply.
7. Before turning on the wet and dry vacuum cleaner, firmly hold the loose end of the
hose. Turn on the motor on by turning the switch to the ‘I’ ON position.
General Operation