Instruction Manual

16
After Sales Helpline 03303 800 661
1 2
3 4
Maintenance
WARNING: REMOVE THE POWERCORD FROM THE POWER SUPPLY BEFORE
CARRYING OUT ANY MAINTENANCE.
1. Verify that the power cord is disconnected from the power socket (Fig. 1).
2. Disconnect the hose from the vacuum cleaner, turning counter clockwise in direction (Fig. 2).
3. Un-clip the latches and remove the power head from the container.
4. Clear all dirt and debris from the container and hose (Fig. 3).
5. Check the hose, attachments, and power cord to verify that they have not been damaged
or any debris is trapped and blocking airflow.
CLEANING CARTRIDGE FILTER
1. Unlock and remove the filter retainer cap by tuning the retainer handle counter clockwise.
2. Carefully hold and pull the cartridge filter up to remove (Fig. 4).
3. Clean the cartridge filter by gently tapping or brushing off dirt. Cleaning should not be
done indoors or in living areas. For optimal performance it is recommended to replace
the old filter with a new filter regularly.
4. Wet filters should be removed and allowed to dry before reinstalling onto the filter cage.
Replacement filters and dust bags can be purchased from the after sales helpline.