Instruction Manual

19
After Sales Helpline 03303 800 661
PROBLEM POSSIBLE CAUSE SOLUTION
The appliance does not
work.
No power.
Check the power supply and
fuse.
Functional fault in the power
cord, switch, or motor.
Have the damaged part
checked by qualified
personnel or contact the after
sales helpline.
Dust is escaping from the
motor cover.
The cartridge filter is
missing or damaged.
Put in a cartridge filter or
replace it.
Misuse the cartridge filter
when wet vacuuming,
causing the damage of
cartridge filter.
Replace the cartridge filter
with the foam filter.
Misuse the foam filter when
dry vacuuming.
Replace the foam filter with
the cartridge filter.
Power tool take-off socket
does not work.
Power tool wattage exceeds
max power 1400W.
Check the wattage is
compatible with the power
tool take of socket.
Incorrect operating mode
selected.
Ensure the switch is moved
into position II.
Low suction power and high
operating noise / vibrations.
Dust bag is full. Replace the dust bag.
Suction nozzle, hose, or
tank inlet is blocked.
Check the suction nozzle,
hose, and tank inlet for
obstructions.
Cartridge filter is blocked.
Remove the cartridge filter
and clean.
Float valve has closed.
Empty the container of any
liquid waste and ensure
the float value located
underneath the filter is able
to move freely.
Troubleshooting