Instruction Manual

Customer Helpline 0333 3201989
19
Maintenance
There are no user serviceable parts in your power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the ventilation slots. This is normal and
will not damage your power tool.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
Technical Data
Trouble Shooting
Technical Data Table
Rated voltage 230-240V~50Hz
Rated power 130W
Collet size Ø1.6 / Ø2.3 / Ø3.2mm
Rated no load speed 10000-32000/min
Protection class
/II
Weight 0.68kg
A weighted sound pressure L
pA
: 71dB(A)
A weighted sound power L
wA
: 82dB(A)
K
pA
& K
wA
=3.0dB(A)
Wear ear protection.
Noise Information
1. If your power tool does not start, check the plug on the mains supply first.
2. If your power tool use in low efficiency, check the tool speed and type of accessory.
3. If a fault can not be rectified, return the tool to an authorized dealer for repair.