User Instructions

www.feiyu-tech.com 54
2.1.2 Charging for the Remote Control
Using USB2.0 to Micro cable to charge the remote control, support 5V/3A input.
2.2 Unlock/Lock
There is a position lock on the tilt axis, which is convenient for locking the
position, installation, storage.
Unlock the gimbal before powering on it.
2.3 Battery Installation
Please fully charge the dedicated battery before power on the
gimbal for the 󽗉rst time.
Install the battery: Push the battery in along the slot ①, and after that, the battery
lock ② will rebound to prevent battery from falling.
Remove the battery: Unlock the battery lock ② and pull the battery out.