User's Manual Part 1

Mode /Function
8
The orientation of the camera is fixed.
Panning Mode
Tilting and rolling direction are fixed, and the camera
lens moves according to the hand movement of the user.
Panning and Tilting Mode
The rolling direction is fixed, and the camera lens moves
according to the hand movement of the user.
Lock Mode
Reset
Reset to initial status.
Reset the tilting axis of the gimbal to initial orientation and initial mode
Function Button
Double tap
Single tap
Mode /Function
Explanation
Panning Mode / Lock Mode
Panning and tilting mode
Triple tap
Single tap to switch between panning mode and lock mode
When in panning and tilting mode, press once to switch to lock mode
Inversion Mode
Pressing the function button three consecutive times in any operating mode, the gimbal
will switch to the Inverted Mode . Pressing the function button three more times while in
Inverted Mode to switch back to the original orientation.
Quadruple tap
Reset
Long press until the red
light flashes quickly
Single tap again to awake the gimbal, or triple tap to initialize the gimbalStandby
Mode /Function Operation Instructions
Blue light flashes once
Blue light flashes twice
Panning
Panning and tilting mode
Lock mode / InitializingBlue light on steadily
Blue light keeps flashing
Initialization failure /
Malfunction
Blue light flashes three times
Standby
Low battery
Red light flashes three times
Red light keeps flashing
Switching to standby mode/
Gimbal will power off
Indicator Status
Mode / Status