Operation Instruction

1. Soak the dry soft cloth with 75%alcohol.

2. Wipe all surfaces of the motor component, power adapter,

charging base and other components with a wet soft cloth for at

least 3minutes.

3. Wipe the surface of the component with a dry soft nap-free

cloth.

Note:

a) The cleaning and disinfection must be performed within

10min before use.

b) The disinfectant used must be used immediately, no foaming

is allowed.

c) In addition to 75% alcohol, you can use non-residue

disinfectants such as Oxytech from Germany, but you must

respect the concentration, temperature and time specied by the

disinfectant manufacturer.

d) After cleaning and disinfecting the motor component, you

must install a disposable barrier before use and repeat steps 1,

2 and 3 to clean the disposable barrier (For detailed installation