Operation Instruction
30
them into a clean tray;
2. Use a clean soft brush to carefully brush outer sheath, head
and back cover of the outer sheath until the dirt on surface is
not visible. Then use soft cloth to dry the products and put them
into a clean tray. The cleaning agent can be pure water, distilled
water or deionized water.
3. Disassembling steps
a) Remove the disposable prophy angle.
b) Remove the outer sheath from the handpiece.
6.4.3 Cleaning
The cleaning should be performed no later than 24 hours after
the operation.
The cleaning can be divided into automated cleaning and
manual cleaning. Automated cleaning is preferred if conditions
permit.
6.4.3.1 Automated cleaning
• The cleaner is proved to be valid by CE certication in
accordance with EN ISO 15883.