User's Manual

BTP02
User Manual – 3/12
1.4. Overview of the speaker's back face
The speaker features the following buttons and connectors on its back face:
(6) On/Off button
(7) Power supply connector
(8) Bluetooth® pairing button
(9) Auxiliary input connector
1.5. Safety instructions
- Place your speaker on a flat surface, to avoid the risk of the speaker falling.
- Never open up your speaker, as you risk damaging its internal components.
- This speaker is intended for use in a temperate environment.
- To prevent the risk of fire or electrical discharge, keep your speaker away from:
- rain or humidity, as well as all fluids (water, chemical products or any other liquids),
- sources of heat such as heaters, stoves or any other heat-producing devices
(including amplifiers),
- direct sunlight.
- Do not expose your speaker to drips or splashes of water.
- Never place any object filled with liquid (a glass, vase...) on your speaker.
- Completely disconnect your speaker if you do not plan on using it for an extended period
of time.
- Make sure that the speaker's power plug connected to an electrical outlet remains easily
accessible.
- Disconnect the speaker before cleaning. Use a damp cloth and avoid using aerosol
cleaners.
- Markings are located on the underside of the speaker.
- The speaker’s power plug serves to completely power off the device.
- Replace the speaker's power supply or accessories respecting the specifications of the
manufacturer or its authorized representative.
- This product contains no internal pieces which can be repaired by the user. Maintenance
must be carried out by the manufacturer or its authorized representative.
- Only use power supply listed in the user manual: GM12-050200-2 Adaptor (ratings:
Input: 100/240 VAC, 50/60 Hz, 0.5 A; Output: 5 VDC, 2 A)
WARNING: RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY A BATTERY
OF AN INCORRECT TYPE. FOLLOW THE INSTRUCTIONS REGARDING THE
DISPOSAL OF BATTERIES.