Users Manual

3 4
Right-hand accelerator (mode 1)
Attentions
1.Official Statement
(1)This device is a sophisticated piece of technology that combined professional knowledges such as mechanism, electronics, aerodynamics and HF transmitter, thus must NOT be used as a toy. User must act caution and operate safely; if not, it may leads to severe accidents which result in critically physical injury or economic losses, under this circumstance we manufacturers claim no responsibility as we are not able to monitoring the process of the installation and operation carried out by the user. (2)This device is best to be operated by experienced UAV users whose age is above 14. (3)Only to be operated in legal UAV operating space according to local laws. (4)The manufactures will claim no safety responsibility relevant to operation, usage and controlling of the device after it is sold. (5)We authorized the dealers to provide technical support and after sale service, should there be any issue on operating or need for reparation, please contact your local dealer. 2.Precautions (1)Keep away from obstructions or crowd. UAV poses a potential threat since it’s uncertainty on flight speed and conditions. Must keep it away from crowd, buildings, HV cables, etc. when inflight, to ensure the safety of people and properties around the user. This device is also not capable of flying under stormy, rainy or thundering weather conditions. (2)Do not operate in humid environment. Inside of the device installed various kinds of sophisticated electronical and mechanical components,thus it’s essential to keep the device dry at all times to avoid any components malfunction due to the humid environment. (3)Operate safely The user should operate the UAV in good self-condition with caution. Operate when fatigue, in poor mental state or poor handling could result in accident. (4)Keep away from high spinning unit. The user and crowd must keep away from the propellers when they are in hign spinning state, to avoid any danger or damage. (5)Keep away from heat source This UAV is consist of metal, plastic, electronical components etc., heat source or direct sunlight could bring deformation or damage to the device. 3.Before flight
(1)Choose an wide open space to operate, we suggest at least 8m(L) x 8m(W) x 5m(H). (2)Make sure both batteries on the remote controller and the device are full. (3)Make sure the joysticks on the controller are in lowest end before operating. (4)When turn on the device, the right sequence apply. The wrong sequence would result in UAV out of control, thus possible damage. Please develop a habit to follow the right turn on/off sequence. (5)Make sure the battery is solidly connected to other components like the motors. The continuous vibration could loosen the connection which result in losing control of the device. (6)Crashing could affect the motors or result in noise, therefore affect the flying conditions or even device breakdown. Should that happen, contact the local dealer as soon as possible to change the components, so the device could recover its groove.
Mobile phone clamp Emergency stop(press for a long time simultaneously)
Emergency stop(press for
a long time simultaneously)
Rolling(press for once downward)
High-middle-low speed switch
(press once downward for once)
Power indicator
Power switch
Press the button tightly and
press switch to turn on
simultaneously.
One-key flight(press for once)
One-key falling(press for once)
Front fine tuning
Back fine tuning
Front-back/
left-right steering joystick
Left steering fine tuning
Right steering fine tuning
Headless mode (press for 2 sec for a long time)
One-key course reversal (press for once for a short time)
Accelerator/left-right joystick
Right fine tuning Left fine tuning
Emergency stop(press for
a long time simultaneously)
High-middle-low speed switch (press once downward for once)
Power indicator
Mobile phone clamp Emergency stop(press for a long time simultaneously)
Rolling(press for once downward)
Power switch