User guide

- 7 -
3. Getting Started (GV5500/GV5900 only)
You will initially open your GunVault safe with the 9v power. Attach a 9v batter (Duracell required)
and insert the plug end of the adaptor into the AC/DC power supply port located on the upper left hand
corner of the right side of the safe. Enter the default code of 1-2-3-4 to open the safe door.
Locating the battery Tray Kit
For the GV5500/GV5900, the battery tray is located inside on the roof of the safe. Remove the two
thumb screw located at both ends. Disconnect the power cable from the battery tray and remove from
the safe.