SpeedVault SAFE QUICK STRONG SMART SV500 SVB500 Please visit GunVault.
Leaders in Responsible Firearm Storage Since 1990, GunVault has been an industry leader and innovator of quick access personal safes. We pride ourselves on our commitment to manufacture a responsible firearm storage solution with the highest in quality and patented design. At GunVault we stand behind our products. We understand that in a time of crisis you rely on the security and protection GunVault provides. Thank you for your trust and welcome to the GunVault family.
Index Quick Start Guide .................................................. 02 Product Features for Digital Unit ........................ 04 Programming Digital Keypad .............................. 04 Installing Digital SpeedVault ................................ 05 Safety Features for Digital Unit ........................... 05 • Tamper Detect Feature • Low Battery Warning Indicator • Security Sleep Mode Feature • Mute Button Feature Product Features for Biometric Unit .................
Quick Start Guide Need a quick start solution so you can begin using your safe? We’ve got you covered. Our easy quick start guide will help you setup your safe in no time. Quick Battery Install Unit includes backup keys. Step 1: Open the unit with the backup keys provided. Step 2: Locate the battery compartment on the Quick Programming (Digital Unit Only) Your access code can be a single press of one or more buttons at the same time.
Safe To Armed In Seconds SCAN QR CODE TO VISIT OUR WEBSITE FOR FAQ'S, VIDEO TUTORIALS, AND MORE.
Product Features (DIGITAL SPEEDVAULT ONLY) 1. Indicator Light 2. Internal Courtesy Light (Inside the unit) 3. Learn Button 4 2 1 3 4 (Inside the unit) 5 4. Mute Button (Inside the unit) 5. Battery Compartment (Inside the unit) 6. Bumper Bracket 7. Mounting Bracket 8. Digital Keypad 9. Keyport 10. Wood Screws 11. Thumbscrew 12.
Step 6: Enter your new access code a second time. During this step the red indicator light will remain illuminated. Step 7: Press and hold the Learn button a third time. The indicator light will flash green and beep six times, this will confirm that the new code has been accepted. If the indicator light illuminates in red and beeps six times, an error has occurred and you will need to repeat steps 3-7. Step 8: Test your combination to confirm your new access code. Step 9: Now you are ready to use your safe.
Mute Button Feature This feature will mute or unmute the audio in your unit. Step 1: Open the unit and locate the Mute button on the interior roof of the unit. Step 2: Press and hold the Mute button for three seconds. While holding the mute button, the indicator light will remain solid red. When the indicator light flashes green and beeps 3 times this will indicate a successful activation. Step 3: Now you have successfully activated/deactivated the mute feature.
Product Features (BIOMETRIC UNIT ONLY) 2 1. Indicator Light 2. Start Button 3. Internal Courtesy Light 5 3 4 4 (Inside the unit) 4. Learn/Mute Button 6 (Inside the unit) 1 5. Delete Button (Inside the unit) 9 6. Battery Compartment 7. Bumper Bracket 8. Mounting Bracket 9. Swipe Scanner 10. Keyport 11. Wood Screws 12. Thumbscrew 13.
Step 4: While the indicator light is flashing green, place the tip of your finger at the top of the reader guide,then swipe your finger in a downward swiping motion taking one to two seconds per interval. The indicator light will flash green and you will hear a single beep. If the indicator light flashes red this indicates an unsuccessful swipe and you will need to repeat this step as needed. If the green indicator light stops flashing you will need to repeat step three.
Safe Feature Section Biometric Unit Only Mute Button Feature Low Battery Warning Indicator This feature turns audio for unit off and on. Step 1: When you enter the correct combination and the battery is low, the indicator light will flash red and beep six times. Depending on the low battery level, the unit may sound when releasing the lock. If the battery level is too low, the indicator light will start to flash red and beep continuously until the battery is removed from the unit.
Warnings The backup key is for emergency use only in the event of fingerprint failure or forgotten passcode. For Key Replacement visit the GunVault.com/key_replacement to complete the online key replacement form. In order to receive a replacement key you will need to know the key number associated with your unit. You can find this information on the unit engraved on the keyport. Replace the batteries once a year regardless of whether or not the low battery indication is triggered.
GunVault's Exclusive 5 year Warranty 1. GunVault (the “Company”) warrants to the original consumer (the “Purchaser’) of any GunVault safe (the “GunVault safe”) purchased after January 1, 2014 against any damage caused by fire, burglary or attempted burglary for a period of five (5) years from the date of purchase. 2. The Company warrants to the purchaser that the GunVault safe will be free from defects in workmanship and materials for a period of one (1) year from the date of purchase. 3.
PRODUCT REGISTRATION INFORMATION This is not a Registration Form To submit your warranty registration go to GunVault.com/warranty/ or call our Customer Service Department at (800) -222- 1055. For Key Replacement visit the GunVault.com/key_replacement to complete the online key replacement form. In order to receive a replacement key you will need to know the key number associated with your unit. You can find this information on the unit engraved on the keyport.
This page intentionally left blank
For Additional Support Visit: GunVault.com or call our Customer Support (800) -222- 1055 SAFE QUICK STRONG SMART © 2017 ALPHA GUARDIAN Las Vegas, NV 89119 USA AlphaGuardian.com I GunVault.
