SVB500 SpeedVault® Owner’s Manual Patented Rev 3 (04/14)
SAFETY INFORMATION WARNING: GunVault® products or any other firear m storage device cannot take the place of other safety procedures; including advising children of the dangers of firearms. WARNING: Never grab your firear m by the trigger w hen removing or plac ing it into your GunVault® product. Alw ays make sure your firearm’s safety mechanism is on. WARNING: Alw ays follow the firearm safety rules set forth by the firearm’s manufacturer.
GETTING STARTED Mounting Positions: Using the provided bracket, the SpeedVault® Biometric can be mounted from the: Left Right Back Top Tools Needed: Phillips-Head Screw Driver Needle Nose Pliers 9V Alkaline Battery Optional Tools: Power Drill Phillips-Head Bit GunVault ® Tip: For best performance, use a battery with expiration date 4 years out. We strongly advise to get name brand batteries and avoid lithium, duralock, & rechargeable batteries. Only use alkaline batteries.
® ZINSTALLING THE SPEEDVAULT Step 1. Select a location to mount the unit. The SpeedVault® uses gravity to drop the drawer open and will need enough space in front of unit to fully open. Step 2. Secure the “Mounting Bracket” to the desired location using the “Wall Mounting Holes” and the wood screws. Mounting screws provided are for solid wood surface only. If mounting to another surface type (drywall, cement, etc.) the appropriate hardware can be purchased through a local hardware store. Step 3.
PROGRAMMING THE SPEEDVAULT® The SpeedVault® Biometric can store 120 fingerprints with the first two enrolled fingerprints being the administrators. The administrator finger prints will be needed to program additional users. You will know you have reached the maximum 120 fingerprint enrollment if the Learn/Mute button is pressed and the LED flashes red once and the unit beeps once.
ENROLLING ADDITIONAL USERS Step 1. After enrolling the first two administrator fingerprints, open the unit using key or biometric scanner and press the Learn/Mute Button. You will hear one beep and the LED will turn green indicating the enrollment procedure has started. Step 2. Swipe the administrator fingerprint from Position 1 to Position 2 and you will hear two beeps indicating the additional fingerprint is ready for enrollment. Step 3.
USING THE KEY ACCESS Step 1. Insert the key into cylinder key hole on the unit. Step 2. Turn clockwise to unlock the unit. Door will drop open. Step 3. Turn the key counterclockwise to original position and remove. The key is for emergency use only to unlock the case in the event of fingerprint failure. Do not try to remove the key in any other position or this may cause damage. Do not try to use the fingerprint scanner while the key is in the unit.
TECHNICAL SUPPORT Troubleshooting my SpeedVault® Biometric What is the problem? Why is the problem happening? How do I solve the problem? When I swipe press the start button, unit beeps 3 times with 3 red flashes. Low battery indicator signals it’s time for a battery change Replace with 9V regular Alkaline battery. (Do not use lithium or rechargeable batteries) (See PG. 6.) When I swipe my finger, I get one red flash. The unit did not recognize your fingerprint. Re-scan your fingerprint.
LIMITED WARRANTY 1. GunVault (the “Company”) warrants to the original consumer (the “Purchaser’) of any GunVault safe (the “GunVault safe”) purchased after January 1, 2014 against any damage caused by fire, burglary or attempted burglary for a period of five (5) years from the date of purchase. 2. The Company warrants to the purchaser that the GunVault safe will be free from defects in workmanship and materials for a period of one (1) year from the date of purchase. 3.
Inquiries or questions regarding the SpeedVault® Biometric should be directed to: GunVault®, Inc. GunVault.
