BTV2 Quick Setup Guide B00GUTY3DK
Setup Your speaker is partially charged when it arrive so you can use it right away. For the best reception, keep the speaker within 30 feet of the device it’s paired to. Pairing the speaker and a device •Turn ON the speaker. A tone sounds and the LED blinks. •Turn ON your device (like a phone or tablet). •On your device, locate your Bluetooth settings and turn on Bluetooth. •In Bluetooth Settings, scan for devices if necessary, then select Amazon_BT2 from your device’s list.
Pairing another device •Disconnect from the previous device by pressing and holding the function button. A tone sounds and the LED blinks. •Repeat the Pair the device steps for your next device. Note: You can pair multiple devices but you can only have one device actively paired at a time. Reconnecting a previously paired device •Disconnect from any other device by pressing and holding the function button. A tone sounds and the LED blinks.
Use as a speakerphone You can listen through the speaker and speak through the speaker’s microphone during phone calls. Position the speaker about 2 feet away and speak normally. If you make a call while paired: The audio and microphone automatically default to the speaker. •Use your phone to make the call •Press the function button to end the call If you received a call while paired: Your phone rings through the speakerphone.
Connect with an audio cable Connect a 3.5mm audio cable (not included) from the speaker’s AUX jack to your audio device (like an MP3 player). Note: When connected to AUX, please disconnect from Bluetooth, use the controls on the device instead of the speaker.
Charge the speaker After turn on the speaker, if the battery level is low, the speaker’s Red LED flashes. If not charged, the speaker shuts off. To charge the speaker, connect the USB charging cable to the charging port and an available USB port on your computer. If the speaker is ON, the Red LED will “ON” when charging. If the speaker is OFF, the Red LED will “ON” while charging and turn off when fully charged. Remark: Please aware that the Blue LED is in ON/flashes status when the speaker is “ON”.
Safety and Compliance WARNING: To reduce the risk of fire or electrical shock, do not expose the system to rain or moisture. FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PRODUCT DISPOSAL INFORMATION Dispose of this product in accordance with Local and National Disposal Regulations. WEEE Regulatory Information: Disposal of Waste Electrical and Electronic Equipment (WEEE) The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimize the impact of electrical of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life.