Instruction Manual ∙ English AmazonBasics Bluetooth® Speaker Quick Setup Guide ＢＴ Ｖ ３ B00GUTY132
Setup Your speaker is partially charged when it arrive so you can use it right away. For the best reception, keep the speaker within 30 feet of the device it’s paired to. Pairing the speaker and a device •Turn ON the speaker. A tone sounds and the LED blinks. •Turn ON your device (like a phone or tablet). •On your device, locate your Bluetooth settings and turn on Bluetooth. •In Bluetooth Settings, scan for devices if necessary, then select Amazon_BT3 from your device’s list.
Pairing another device •Disconnect from the previous device by pressing and holding the function button. A tone sounds and the LED blinks. •Repeat the Pair the device steps for your next device. Note: You can pair multiple devices but you can only have one device actively paired at a time. Reconnecting a previously paired device •Disconnect from any other device by pressing and holding the function button. A tone sounds and the LED blinks.
Use as a speakerphone You can listen through the speaker and speak through the speaker’s microphone during phone calls. Position the speaker about 2 feet away and speak normally. If you make a call while paired: The audio and microphone automatically default to the speaker. •Use your phone to make the call •Press the call-divert button to end the call If you received a call while paired: Your phone rings through the speakerphone.
Call-divert function After you receive your call by using the Amazon_BT3, if you want to transfer your listening and speaker of the call from the Amazon_BT3 back to the mobile device, *Press and hold the call-divert button for 2 sec. *Then, you can use your phone to answer and listen to the call. Connect with an audio cable Connect a 3.5mm audio cable (not included) from the speaker’s AUX jack to your audio device (like an MP3 player).
Charge the speaker After turn on the speaker, when the battery is low the speaker’s LED flashes red. If not charged, the speaker shuts off. To charge the speaker, connect the USB charging cable to the charging port and an available USB port on your computer. If the speaker is ON, the Red LED will “Flash” when charging. If the speaker is OFF, the Red LED will “Flash” while charging, and Red LED keep solid when fully charged.
Safety and Compliance WARNING: To reduce the risk of fire or electrical shock, do not expose the system to rain or moisture. FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PRODUCT DISPOSAL INFORMATION Dispose of this product in accordance with Local and National Disposal Regulations. WEEE Regulatory Information: Disposal of Waste Electrical and Electronic Equipment (WEEE) The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimize the impact of electrical of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life.
