User's Manual

21 I 72
Figure 20: Entering pipe settings – cont.
• Click the “Add Segment” button to enter a new pipe segment. Then complete the “Length,
Material and Diameter” fields. The sound velocity is automatically calculated from your
values and entered in the respective field. If you have more exact information on the
sound velocity in this pipe segment, you may enter it manually in this field
• To apply the settings, click the “Save” button
• An already stored entry can be removed by clicking “Remove Segment; confirm removal
by clicking “Save”
3.2.3 Entering Pipe Data with the Pipe Wizard
With the Pipe Wizard, data for the pipe settings are determined automatically via the pipe
network and entered.
• First, you are requested – if necessary – to move the Logger to the correct position. To do
this, click the Logger that you would like to move and drag it to the desired position.
Repeat the process with both Loggers until they are correctly positioned. Use “Undo” to
undo your last change
• The Logger 1 and Logger 2 fields indicate the respective, current positions of the Loggers
• Once the Loggers are correctly positioned, click “Next”