User's Manual

48

10.3 ExhaustiveCorrelation

ClickontheExecuteallcorrelationsbuttontoperformanexhaustivecorrelation.Thewindowappears
enablingtheusertochangethequalitylimitanddistancebetween2loggersbeforeexecutecorrelations.




Fig.39settingthe preferencesin executecorrelations

Pressstarttocorrelateandallthecombinationswillbeexplored.Alistofcorrelationgreaterthanquality
limit(e.g.60%)willbeproduced.Thehigherthequalitypercentagethegreatertheprobabilityofagood
correlation.

Runthroughthelistanddoub
leclickonLogger1’sserialnumber,thesinglecorrelationwindowwillappear
whichallowsthepipedatatobeenteredandasinglecorrelationtobeperformedasdescribedinthe
previoussection.
