User's Manual

35 / 56 ZONESCAN net
Version 1.4
To Add a Picture of the selected Repeater.
To Print out a report for the selected Repeater to include all the fields in the
Tab
Click Add Logger to add a not-yet existing logger to the list. In the window
that opens, enter the values for Repeater No., Location, Latitude and
Longitude. After entering all values, confirm your entries by clicking the
Save button.
To make changes to the base settings of existing repeaters, select Edit
Repeater. Make the desired changes and then click Save.
Repeaters listed in the table can be deleted with the Delete Repeater item.
To delete the measurement data of a repeater, click the Delete Repeater's
Measurements item.
Use this item to delete all repeaters for the current project.
The measurement data of all repeaters is deleted by clicking this item.
4.3 Logger tab
In the Logger tab, all loggers of the current project are displayed.
Figure 34 Logger Tab
Picture
Maintenance
Add Repeater
Edit Repeater
Delete Repeater
Delete Repeater's
Measurements
Delete All Repeaters
Delete All Repeaters'
Measurements