User's Manual

37 / 56 ZONESCAN net
Version 1.4
To display the Minimum Temperature of the selected Logger, click the Min
Temp item.
To display the Maximum Temperature of the selected Logger, click the Max
Temp item.
To display the charge state of the selected logger, click the Battery History
item.
To add a comment about a logger, select the Comments item. Enter the
desired comment in the text field that appears. Click Apply to save the
entered comment. The text is displayed in the table in the Comments field.
To Add a Picture of the selected Logger.
To Print out a report for the selected Logger to include all the fields in the
Tab
Click Add Logger to add a not-yet existing logger to the list. In the window
that opens, enter the values for Logger No., Location, Latitude and
Longitude. After entering all values, confirm your entries by clicking the
Save button.
To make changes to the base settings of existing loggers, select Edit
Logger. Make the desired changes and then click Save.
Loggers listed in the table can be deleted with the Delete Logger item.
To delete the measurement data of a logger, click the Delete Logger's
Measurements item.
Click Delete Logger's Sound Signals to delete the recorded signals.
Use this item to delete all loggers for the current project.
The measurement data of all loggers is deleted by clicking this item.
Click this item to delete the sound signals of all loggers.
Min Temp History
Max Temp History
Battery History
Comments
Picture
Maintenance
Add Logger
Edit Logger
Delete Logger
Delete Logger's
Measurements
Delete Logger's Sound
Signals
Delete All Loggers
Delete All Loggers'
Measurements
Delete All Loggers'
Sound Signals