User's Manual

15 / 56 ZONESCAN net
Version 1.4
Entering pipe data manually:
Figure 6 Entering pipe settings
Click the Add Segment button to enter a new pipe segment. Then complete
the Length, Material and Diameter fields. The sound velocity is
automatically calculated from your values and entered in the respective
field. If you have more exact information on the sound velocity in this pipe
segment, you may enter it manually in this field.
To set a filter according to your settings under Maintenance > 4.4 Current
Project, activate the Filter on check box.
To apply the settings, click the Save button.
An already stored entry can be removed by clicking Remove Segment;
confirm removal by clicking Save.
Entering pipe data with the Pipe Wizard:
With the Pipe Wizard, data for the pipe settings are determined
automatically via the pipe network and entered.
First, you are requested – if necessary – to move the logger to the correct
position. To do this, click the logger that you would like to move and drag it
to the desired position. Repeat the process with both loggers until they are
correctly positioned. Use Undo to undo your last change.
The Logger 1 and Logger 2 fields indicate the respective, current positions
of the loggers.
Once the loggers are correctly positioned, click Next.