User's Manual

ZONESCAN net 40 / 56
Version 1.4
Problem when not reachable for:
Define the number of days after which an error is displayed if an Alpha was
not reached.
Preset: 4 days
Warning when below:
Enter the charge state of the batteries of the Alphas below which a warning
is displayed.
Preset: 6.00 V
Problem when below:
Enter the charge state of the batteries of the Alphas below which an error is
displayed.
Preset: 5.50 V
Minimum temperature limit:
Enter the lower temperature value below which a warning or an error is
displayed.
Preset: -30.0°C
Maximum temperature limit:
Enter the upper temperature value above which a warning or an error is
displayed.
Preset: 70.0°C
Warning when temp. below minimum for:
Enter the number of days after which a warning is displayed if the
temperature measured at the Alpha remains below the limit value entered
above.
Preset: 2 days
Problem when temp. below minimum for:
Enter the number of days after which an error is displayed if the
temperature measured at the Alpha remains below the limit value entered
above.
Preset: 4 days
Warning when temp. above maximum for:
Enter the number of days after which a warning is displayed if the
temperature measured at the Alpha remains above the limit value entered
above.
Preset: 2 days
Problem when temp. above maximum for:
Enter the number of days after which an error is displayed if the
temperature measured at the Alpha remains above the limit value entered
above.
Preset: 4 days
Repeater tab
Battery Voltage
Warning Limits
Temperature Warning
Limits