User's Manual

43 / 56 ZONESCAN net
Version 1.4
Possible leak:
Enter the values based on experience for displaying a possible leak.
Preset: 40
Probable leak:
Enter the values based on experience for displaying a probable leak.
Preset: 70
Warning when not reachable for:
Define the number of days after which a warning is displayed if a logger
was not reached.
Preset: 4 days
Problem when not reachable for:
Define the number of days after which an error is displayed if a logger was
not reached.
Preset: 8 days
Warning when below:
Enter the charge state of the batteries of the loggers below which a warning
is displayed.
Preset: 2.90 V
Problem when below:
Enter the charge state of the batteries of the loggers below which an error
is displayed.
Preset: 1.40 V
Minimum temperature limit:
Enter the lower temperature value below which a warning or an error is to
be displayed.
Preset: -30.0°C
Maximum temperature limit:
Enter the upper temperature value above which a warning or an error is to
be displayed.
Preset: 70.0°C
Warning when temp. below minimum for:
Enter the number of days after which a warning is displayed if the
temperature measured at the logger remains below the limit value entered
above.
Preset: 4 days
Problem when temp. below minimum for:
Enter the number of days after which an error is displayed if the
temperature measured at the logger remains below the limit value entered
above.
Preset: 8 days
Warning when temp. above maximum for:
Enter the number of days after which a warning is displayed if the
Leak Value Warning
Limits
Reachability Warning
Limits
Battery Voltage
Warning Limits
Temperature Warning
Limits