Installation Guide

Use a sharp pair of tin snips to cut through the aluminum rail and the mesh.
Commercial-grade scissors can also be used to cut the mesh.
Each section has mesh that extends past the aluminum rail. Lay one end of
the mesh so it overlaps directly over the other section.
Note: The rear rail has more exposed mesh than the front rail. This is intentional.
CUTTING SECTIONS
JOINING SECTIONS
Cutting & Joining Sections
DO IT RIGHT. DO IT ONCE.
HAVING TROUBLE?
Check out this video to see our recommended
method for cutting the rails.
gutterguard.com/contact | [phone] | M-F 8am-7pm CST
NEED HELP?
INSTALLATION
10