Instructions / Assembly

INSTALLATION
INSTRUCTIONS
Quick & Easy Installation
No Tools or Cutting Needed
Start with clean, flowing gutters
Remove all leaves and debris from gutters and downspouts before installing GutterBrush.
Be sure gutters are properly pitched and flowing toward adequate number of downspouts.
Slide GutterBrush sections filling the existing gutter from end to end
Slide under gutter's hangers, brackets or spikes throughout entire gutter channel to ensure
complete protection.
No Need to Cut GutterBrush
When a section of brush is longer than the remaining
gutter section, simply bend or fold the brush back into itself
to create the required length. It is also possible to overlap
the ends of 2 sections.
Corners
When installing GutterBrush around corners simply bend
the brush to fit the corresponding gutter shape or section.
That’s It !!!
1.
2.
3.
4.
5.
“Dear Customer,
Home improvement experts and contractors praise the performance, ease of installation, low
maintenance and economic value offered by GutterBrush and we hope you will feel the same.
Thank you for your purchase!”
GutterBrush will eliminate or greatly reduce the need for regular gutter cleaning.
In extreme cases involving a heavy load of small debris, occasional maintenance may be required. Simply remove brush
sections, shake out excess debris and reinsert brush.
M
A
D
E
I
N
USA
Company founders
Bob & Randy Schreiber
Give brush a 1/4 turn once in place and bent bristles will evenly spread around gutter
brackets or spikes.