User Manual

MOTORIZED SLIDER
尺寸：198*210mm 1折2页
1 2
1 2
1 2
3
1 2
4 5
1 2
wireless
controller*1
battery*2 battery
charger*1
wireless controller
charger*1
shutter cable*1
motorized
camera head*1
Carry bag*1Extension shutter
cable*1
1
Packing list
2
Mounting the slider and camera
1. Please charge the wireless controller and battery before
using this product.
sketch of charge the wireless controllersketch of charge the battery
2. Please install and use this product as shown in the picture.
1）Mounting the motorized camera head on the slider.
(As shown below)
2）Mounting the camera on the slider. (As shown below)
4）Install the battery on the slider and check the signal
cable or shutter cable connecting correctly or not.
(As shown below)
3）Connect the extension shutter cable.(As shown below)
3
Slider motion
1. Turn on the slider and wireless controller. (The slider ’s
LED indicator light open and blinking, the controller’s
screen open as shown below)
3. Manual operation mode: “Video Shot”-“Manual Mode”
(Press the button of the controller and the orbit will act
accordingly)-choose the “speed” menu can adjust the
current speed.
2. Bluetooth wireless connection: press “Setting”-
“Bluetooth Setting”-“Searching Device”-choose the device
code which start with letter D-press”OK” button to confirm
the device(The upper right of the screen will show if
the connecting is successful)
-›-›
Video Shot
Time Lapse
Panotama Shot
Setting
Language : English
Reset : No
Version : 1.0.0
Bluetooth Setting
Searching Device
Language : English
Reset : No
Version : 1.0.0
Bluetooth Setting
1: D8B04CEAC83F
-›-›
Video Shot
Time Lapse
Panotama Shot
Setting
Manual Mode
Auto Mode
Speed : 100%
Axis X : 0
Axis Y : 0
Axis Z : 0
-›-› -›-› -›-›
Speed : 100%
Axis X : 0
Axis Y : 0
Axis Z : 0
Speed : 100%
Axis X : 1058
Axis Y : 0
Axis Z : 0
-›-› -›-›
4. Auto operation mode:
① Setting the append point:
A : “Video Shot”-“Auto Mode”-“Set key”-“Append Point A”
(Move the camera to the start point you need)-“Save:Yes”
(As shown below)
Video Shot
Time Lapse
Panotama Shot
Setting
Manual Mode
Auto Mode
Set Key
Auto Loop
Auto Stop
-›-› -›-› -›-›
Append Point A
(Start point)
B : “Video Shot”-“Auto Mode”-“Set key”-“Append Point B”
(Move the camera to the end point you need)-“Save:Yes”
(As shown below)
Append Point B
(End poin)
Append Point : A
Axis X : 0
Axis Y : 0
Axis Z : 0
Save : Yes
Append Point
Update Point
Delete Point
Point :
void
-›-› -›-› -›-›
Append Point : B
Axis X : 0
Axis Y : 0
Axis Z : 0
Save : Yes
Append Point
Update Point
Delete Point
Point :
void
-›-› -›-› -›-›
5. Time Lapse: “Time Lapse Setting” - setting the “Times”,
“ Photos”,”Stop Time”,”Delay Time”,Set start” and “set End”
-”Execution”(As shown below)
Diagonal A Diagonal B
Video Shot
Time Lapse
Panotama Shot
Setting
Set Key
Time Lapse Setting
Times : 00:00:01.0
Photos : 1
Stop Time : 1.0
Delay Time : 0.2
Set start : A
Set End : B
TimeLapse Status : Running
Completion : 0
Remaining : 0
Run Time : 00:00:01
Battery : 0.000
-›-›
Loop : Yes
Execution
-›-›
-›-› -›-› -›-›
Video Shot
Time Lapse
Panotama Shot
Setting
Diagonal A
Diagonal B
AxisX Photos : 4
AxisY Photos : 1
Stop Time : 1.0
Delay Time : 0.2
Execution
-›-› -›-› -›-›
6. panorama shot: Setting the “Diagonal A” and “Diagonal B”
- Setting the “Axis X photos”(As shown below), then press
“Execution”
② Auto Loop mode:
“Video Shot”-“Auto Mode”-“Auto Loop”-adjust the “Speed”-
setting the start point-setting the end point-setting the
“Loop Count”-“Execution”(As shown below)
Set Key
Auto Loop
Auto Stop
Speed : 100%
Set Start : A
Set End : B
Loop Count : 6
Execution
Speed : 100%
Set Start : A
Set End : B
Loop Count : 6
Execution
Speed : 100%
Set Start : A
Set End : B
Loop Count : 6
Execution
Speed : 100%
Set Start : A
Set End : B
Loop Count : 6
Execution
Speed : 100%
Set Start : A
Set End : B
Loop Count : 6
Execution
-›-› -›-› -›-›
-›-› -›-› -›-›
GT-80WD
GT-120WD