Data Sheet

OPERATION
119
Clear the tests state
Background
The test state covering TOTAL test counts and
judgments of FAIL is clearly shown on the
READY status of either MANU or AUTO test.
To erase the records, follow the steps below.
Steps
1. Make sure the unit is within the READY status.
If it is under VIEW status, press the STOP key
to return to the READY status. Alternatively, if
it is under the EDIT status, press the SAVE soft-
key followed by the STOP key to return to the
READY status.
READY status
State
table
TOTAL
FAIL
The total test counts
The total FAIL judgments
2. Press and hold the STAT CLEAR
soft-key for 1 second.
The tests state is zeroing