Data Sheet

GETTING STARTED
15
STOP button
The STOP button is used to
stop/cancel tests. The STOP button
will also put the tester in the READY
status to begin testing.
START button
The START button is used to start tests.
The START button can be used to start
tests when the tester is in the READY
status. Pressing the START button will
put the tester in the TEST status.
POWER switch
Turns the power on. The tester will
always start up with the AUTO (0)
test setting display.
Soft Keys
The Soft keys correspond to the menu keys directly
above on the main display.
Scroll wheel
The scroll wheel is used to edit
parameter values. Be aware that
faster the scroll speed, bigger the
value digits can be set and vice versa.
USB Host Port
It can connect with USB flash drive
for parameter storage and firmware
upgrade. Also, it is available for
screenshot hardcopy in association
with the Hardcopy key.
ESC/LOCAL Key
ESC allows user to return to
previous page. LOCAL switches
operation back to local mode from
remote mode