Data Sheet

REMOTE CONTROL
199
Err Display
When an incorrect command is sent to the
tester, the Err indicator will be displayed on the
screen indicating there is an error in command.
ERR indicator
Return to Panel Control
Background
When the instrument is remotely controlled all
panel keys except the STOP and START buttons
are disabled. Receive a stop signal from either
mode of Control By (Front, Signal or Both),
while the RMT indicator is displayed, or simply
send a SYSTLOCal command (page 214) to
return the instrument back to the panel control.
Note
To put the tester back to the RMT, simply issue
another remote control command.