Data Sheet

ManualsBrandsGW Instek ManualsInsulation TestersGW Instek GPT-9503 Insulation tester, Dielectric withstand tester

OPERATION

51

4. Press the HI/LO SET soft-key and

then use the scroll wheel to set the

LO SET limit.

ACW (LO)

DCW (LO)

IR (LO)

OFF, 001μA~32.99mA

OFF, 001μA~10.99mA

000.1MΩ~50.00GΩ

Set LO SET limit

5. Press the SAVE soft-key to complete.

Note

*Please note that the resolution of the measured

value depends on the resolution of HI SET setting.

Note

The LO SET setting is limited by the HI SET

setting. The LO SET limit cannot be greater than

the HI SET limit.