Data Sheet

OPERATION
97
AUTO
Parameters
Settings
PASS HOLD
Background
The PASS HOLD setting refers to the holding
duration after PASS judgment is shown on the
display. When the PASS HOLD setting is set, a
PASS judgment is held until the set duration is
fully reached.
1. Use the PREV & NEXT keys or
scroll wheel to move to the PASS
HOLD field.
2. Press the ENTER soft-key followed
by using the arrow keys and scroll
wheel to define a duration.
PASS HOLD
000.2s ~ 999.9s
3. Press the ENTER soft-key to
confirm the setting
Note
The STOP key can be pressed at any time in the set
duration of PASS HOLD to promptly halt the set
PASS HOLD duration.