Data Sheet

ManualsBrandsGW Instek ManualsInsulation TestersGW Instek GPT-9503 Insulation tester, Dielectric withstand tester

GPT-9500 Series User Manual

98

STEP HOLD

Background

The STEP HOLD setting refers to the holding

duration after each step within a AUTO group

1. Use the PREV & NEXT keys or

scroll wheel to move to the STEP

HOLD field.

2. Press the ENTER soft-key followed

by using the scroll wheel to select

an option. When TIME is selected,

define an H-TIME by using the

arrow keys and the scroll wheel.

TIME

Step is held until the set duration (H-

TIME) is reached. 000.2 ~ 999.9 sec

KEY

Step is held until the START key is

pressed.

3. Press the ENTER soft-key to

confirm the setting

Note

The STOP key can be pressed at any time in the set

duration of STEP HOLD to promptly halt the set

STEP HOLD duration.