Data Sheet

ManualsBrandsGW Instek ManualsInsulation TestersGW Instek GPT-9513 Insulation tester, Dielectric withstand tester

UTILITY

147

Copy From USB Setting

Description

Copy the parameters settings from the

connected USB to GPT-9500. It is noted that

only USB1.1 or 2.0, FAT16 or FAT32, capacity

<= 64G can support this function.

Steps

1. Press the UTILITY key on the front

panel followed by using the scroll

wheel to move to the Copy From

USB. Press the ENTER soft-key to

enter the Copy From USB field.

UTILITY

2. Use the scroll wheel to move to

target .SAV file within the USB

followed by pressing OK soft-key

to proceed to the next step.

3. Use the scroll wheel to move to

each check box followed by

pressing the PAGE key to

check/uncheck each parameter.