Data Sheet

ManualsBrandsGW Instek ManualsInsulation TestersGW Instek GPT-9513 Insulation tester, Dielectric withstand tester

GPT-9500 Series User Manual

82

Running a MANU Test

Background

A test can be run when the tester is in the

READY status.

Note

The tester cannot start to run a test under the

following conditions:

 A protection setting has been tripped; when a

protection setting has been tripped the

corresponding error message is displayed on

the screen. See page 274 for a comprehensive

list of the all the setting errors.

 The INTERLOCK function is ON and the

Interlock wire is not shorted in the Interlock

terminal (page 194).

 The STOP signal has been received remotely.

 If Double Action is ON, ensure the START

button is pressed immediately after the STOP

button (<0.5s).

Steps

1. Ensure the tester is in READY

status for the test to come.

Page 37

READY status