Manual

BASIC OPERATION
29
Start and Stop Frequency
Description
The start/stop frequency function will set the
start and stop frequency of the span.
Operation
1. To set the start frequency, press
Frequency
>
Start[F2] and enter the frequency and unit.
2. To set the stop frequency, press
Frequency
>
Stop[F3] and enter the frequency and unit.
Range:
Default Start frequency:
Default Stop frequency:
0kHz~3GHz
0Hz
3GHz
Display
Start Frequency Stop Frequency
Note
The start and stop frequency can change when the
span settings are used.
The stop frequency must be set higher than the
start frequency (for spans  0).