Data Sheet

Output Rating: AC 0 ~ 350 Vrms,
DC 0 ~ ± 500 V
Output Frequency up to 999.9 Hz
DC Output (100% of Rated Power)
Output Capacity: 500VA/ 1000VA
Measurement Items: Vrms, Vavg, Vpeak,
Irms, IpkH, Iavg, Ipeak, P, S, Q, PF, CF
Voltage and Current Harmonic Analysis
(THDv, THDi)
Customized Phase Angle for Output
On/Off
Remote Sensing Capability
OVP, OCP, OPP, OTP, AC Fail Detection
and Fan Fail Alarm
Interface: USB,LAN ;RS-232+GPIB
(std.) (opt)
Built-in External Control I/O and
External Signal Input
Built-in Output Relay Control
Memory Function (up to 10 sets)
Sequence and Simulation Function
(up to 10 sets)
Support Arbitrary Waveform Function
Built-in Web Server
LAN
ASR-2000 Series
Simply Reliable
Electronic Products Electronic/
Component Development Test
Automotive Electrical Equipment
Simulation Test
Household Appliance Application Test
FEATURES
Rear Panel
APPLICATIONS
Front Panel
COMPACT PROGRAMMABLE AC/DC POWER SOURCE
ASR-2000 Series
Ext I/O
MAC Address, DNS IP Address, User Password, Gateway IP Address, Instrument IP Address, Subnet Mask
*1. The voltage display is set to RMS in AC/AC+DC mode and AVG in DC mode.
*2. AC mode: For an output voltage of 17.5 V to 175 V / 35 V to 350 V and 23 °C ± 5 °C. DC mode: For an output voltage of 25 V to 250 V / 50 V to 500 V and 23 °C ± 5 °C.
*3. An output current in the range of 5 % to 100 % of the maximum current, and 23 °C ± 5 °C.
*4. An output current in the range of 5 % to 100 % of the maximum peak current in AC mode, an output current in the range of 5 % to 100 % of the maximum instantaneous current in DC mode,
and 23 °C ± 5 °C. The accuracy of the peak value is for a waveform of DC or sine wave
*5. For an output voltage of 50 V or greater, an output current in the range of 10 % to 100 % of the maximum current, DC or an output frequency of 45 Hz to 65 Hz, and 23 °C ± 5 °C.
*6. The apparent and reactive powers are not displayed in the DC mode.
*7. The reactive power is for the load with the power factor 0.5 or lower. *8. An output voltage in the range of 17.5 V to 175 V / 35 V to 350 V and 23 °C ± 5 °C.
ASR-2000GD1DH
Specifications subject to change without notice.
ASR-2100/ASR-2100R
Up to 20th ± (1 % of reading + 0.2 A / 0.1 A);
20th to 40th ± (1.5 % of reading + 0.2 A / 0.1 A)
OCP, OTP, OPP, FAN Fail
TFT-LCD, 4.3 inch
10 sets for Store and Recall settings
16 (nonvolatile)
4096 words
Type A: Host, Type B: Slave, Speed: 1.1/2.0, USB-CDC
External Signal Input; External Control I/O
SCPI-1993, IEEE 488.2 compliant interface
Complies with the EIA-RS-232 specifications
500 Vdc, 30 M or moreΩ
1500 Vac, 1 minute
EN 61326-1 (Class A)
EN 61326-2-1/-2-2 (Class A)
EN 61000-3-2 (Class A, Group 1)
EN 61000-3-3 (Class A, Group 1)
EN 61000-4-2/-4-3/-4-4/-4-5/-4-6/-4-8/-4-11 (Class A, Group 1)
EN 55011 (Class A, Group1)
EN 61010-1
Indoor use, Overvoltage Category II
0 °C to 40 °C
-10 °C to 70 °C
20 %rh to 80 % RH (no condensation)
90 % RH or less (no condensation)
Up to 2000 m
ASR-2000 : 285(W)×124(H)×480(D) (not including protrusions); Approx. 11.5 kg
ASR-2000R : 213(W)×124(H)×480(D) (not including protrusions); Approx. 10.5 kg
PROTECTIONS
DISPLAY
MEMORY FUNCTION
ARBITRARY WAVE
Number of Memories
Waveform Length
OTHERS
INTERFACE
USB
LAN
EXT Control
Factory Optional
GPIB
RS-232C
INSULATION RESISTANCE
Between input and chassis, output and chassis, input and output
WITHSTAND VOLTAGE
Between input and chassis, output and chassis, input and output
EMC
Safety
Environment Operating Environment
Operating Temperature Range
Storage Temperature Range
Operating Humidity Range
Storage Humidity Range
Altitude
DIMENSIONS & WEIGHT
Standard
ASR 2050/ASR-2050R-
Full Scale
Resolution
Accuracy
*3
5 A / 2.5 A, 100% 10 A / 5 A, 100%
0.01 A, 0.01% 0.01 A, 0.01%
Up to 20th ± (1 % of reading + 0.1 A / 0.05 A);
20th to 40th ± (1.5 % of reading + 0.1 A / 0.05 A)
EFFECTIVE VALUE (RMS)
PERCENT (%)
(AC-INT and 50/60 Hz only)
Resolution
Accuracy
*8
Range
0.1 V, 0.01% 0.1 V, 0.01%
Up to 20th ± (0.2 % of reading + 0.5 V / 1 V);
20th to 40th ± (0.3 % of reading + 0.5 V / 1 V)
Up to 20th ± (0.2 % of reading + 0.5 V / 1 V);
20th to 40th ± (0.3 % of reading + 0.5 V / 1 V)
Up to 40th order of the fundamental wave Up to 40th order of the fundamental wave
PERCENT (%)
(AC-INT and 50/60 Hz only)
HARMONIC CURRENT
SPECIFICATIONS
Range
Full Scale
Up to 40th order of the fundamental wave Up to 40th order of the fundamental wave
175 V / 350 V, 100% 175 V / 350 V, 100%
HARMONIC VOLTAGE
EFFECTIVE VALUE (RMS)
The ASR-2000 series, an AC+DC power source aiming for system integration or desktop
applications, provides both rated power output for AC output and rated power output
for DC output. Nine ASR-2000 output modes are available, including 1) AC power
output mode (AC-INT Mode), 2) DC power output mode (DC-INT Mode), 3) AC/DC
power output mode (AC+DC-INT Mode), 4) External AC signal source mode (AC-EXT
Mode), 5) External AC/DC signal source mode (AC+DC-EXT Mode), 6) External AC
signal superposition mode (AC-ADD Mode), 7) External AC/DC signal superposition
mode (AC+DC-ADD Mode), 8) External AC signal synchronization mode (AC-SYNC
Mode), 9) External AC/DC signal synchronization mode (AC+DC-SYNC Mode).
The ASR-2000 series provides users with waveform output capabilities to meet the test
requirements of different electronic component development, automotive electrical
devices and home appliance, including 1) Sequence mode generates waveform fallings,
surges, sags, changes and other abnormal power line conditions; 2) Arbitrary waveform
function allows users to store/upload user-defined waveforms; and 3) Simulate mode
simulates power outage, voltage rise, voltage fall, and frequency variations. When the
ASR-2000 series power source outputs, it can also measure Vrms, Vavg, Vpeak, Irms,
Iavg, Ipeak, IpkH, P, S, Q, PF, CF, 40th-order Voltage Harmonic and Current Harmonic.
In addition, the Remote sense function ensures accurate voltage output. The
Customized Phase Angle for Output On/Off function can set the starting angle and
ending angle of the voltage output according to the test requirements. V-Limit, Ipeak-
Limit, F-Limit, OVP, OCP, OPP function settings can protect the DUT during the
measurement process. In addition to OTP, OCP, and OPP protection, the ASR-2000
series also incorporates the Fan fail alarm function and AC fail alarm function.
The front panel of the ASR-2050/2100 provides a universal socket or a European socket,
which allows users to plug and use so as to save wiring time. The ASR-2050R/2100R is
3U height and 1/2 Rack width design, which is compatible with ATS assembly. The ASR-
2000 series supports I/O interface and is equipped with USB, LAN, External I/O and
optional RS-232C and GPIB.
Extended Universal Power Socket(ASR-2000R only)
Extended European Power Socket(ASR-2000R only)
ACCESSORIES
FREE DOWNLOAD
CD ROM(User Manual, Programming manual), Safety Guide, Power Cord,
Mains Terminal Cover Set, Remote Sense Terminal Cover Set, GTL-123 Test Lead,
GTL-246 USB Cable
Rack Mount Kit (EIA)
Rack Mount Kit (JIS)
RS-232C Cable, approx. 2M
GPIB Cable, approx. 2M, including
25 pins Micro-D connector
GET-003
GET-004
GRA-439-E
GRA-439-J
GTL-232
GTL-258
ASR-001
Air inlet filter
USB Driver
OPTIONAL ACCESSORIES
ORDERING INFORMATION
Opt01 : RS-232+GPIB Communication Functions(Factory installed)
Opt02 : European Output Outlet only for ASR-2000(Factory installed)
ASR-2050
500VA Programmable AC/DC Power Source
ASR-2100
1000VA Programmable AC/DC Power Source
ASR-2050R
500VA Programmable AC/DC Power Source for 3U 1/2 Rack Mount
ASR-2100R
1000VA Programmable AC/DC Power Source for 3U 1/2 Rack Mount