Instructions

ANALOG CONTROL
117
Analog Remote Control Overview
The PSW power supply series have a number of analog control
options. The Analog Control connectors are used to control output
voltage and current using external voltage or resistance. The power
supply output and power switch can also be controlled using
external switches.
 Analog Control connector overview → from page 117
 External voltage control of voltage output → from page 119
 External voltage control of current output → from page 122
 External resistance control of voltage output → from page 124
 External resistance control of current output → from page 126
 External control of output → from page 128
 External control of the power switch → from page 131
Analog Control Connector Overview
Overview
The Analog Control Connector is a standard
Mil 26 pin connector (OMRON XG4 IDC plug).
The connector is used for all analog remote
control. The pins used determine what remote
control mode is used.
WARNING
To prevent electric shock, ensure that the cover for
the Analog Control Connector is used when the
connector is not in use.
Pin Assignment
1
26
25
2
Pin name
Pin number
Description
Current Share
1
Used when operating 2 or more units in parallel.