User Manual

GETTING STARTED
17
Sweep (2100 series only)
Example: Frequency Sweep. Start Frequency 1Hz, Stop Frequency
1MHz. 1Hz Rate. 1Vpp. Lins Sweep.
Output
50
W
MAIN
1. Press FUNC>select the ramp wave
2. Press AMPL>1>Vpp
3. Press Sweep
4. Press Shift>INT/EXT>select INT
5. Press Shift>Start/Stop>select Start>1>Hz
6. Press Shift>Start/Stop>select Stop>1>MHz
7. Press Shift>Rate>1>Hz
8. Press Shift>LIN/LOG>Select LINS
9. Press Output
10. Press Sweep to deselect the sweep function
Counter (2100 series only)
Example: Frequency counter function, gate time 1s.
Input
OUTPUT INPUT
MOD Counter
MOD
Trigger
1. Press Count
2. Press Shift>Gate>select 1S gate time
3. Connect the signal to the counter input
terminal.
4. Press Count to deselect the counter function.